Brackish Water Treatment Ro Plant
Brackish Water Treatment Ro Plant Brackish Water Reverse Osmosis (BWRO) systems generally exhibit a higher recovery rate compared to Sea Water Reverse Osmosis Plants. The feed Total Dissolved Solids (TDS) of a BWRO typically ranges from 1,000 ppm to 10,000 ppm, depending on the origin of the feed water source and falls within the pressure range of 200 psi up to 400 psi. Brackish Water Treatment Ro Plant
The feed water for Brackish Water RO Plants is commonly derived from either GROUND WATER or SURFACE WATER sources. Predominant constituents in the feed water include calcium and magnesium carbonate, as well as sulphates of calcium, barium, and strontium, along with silica. Well water may present unique challenges related to components that are soluble under reducing conditions but form insoluble substances upon oxidation through contact with air. Examples of such components include manganese, ferrous salts, and hydrogen sulphide.
Benefits Of Brackish Water RO Plant
BRACKISH WATER RO PLANT do eliminates the unwanted substance from the water, from a salt level of 10,000 ppm this plant can produce a high capacity of treated water with lower percentage of rejection compared to Sea Water.
- Improves The Taste And Smell Of Drinking Water
- Removes Toxins From The Drinking Water.
- Different Levels of Purification
- Cutting Down The Probabilities Of Water-Borne Diseases To A Large Extent
The mentioned substance can be removed by BWRO, using a pre treatment of Silica Sand and Gravel with 20 micron filtration, bigger particles will be remove and after Multimedia it is always followed by a micron filtration to do a finer filtration before the water goes to the RO Membrane which requires a high pressure to pass the water into a Semi Permeate RO Membrane.
Benefits
- Fully Equipped and Customizable
- Components Easily Accessible
- Pre-Plumbed, Wired, and Assembled
- Individually Tested and Preserved
- Low Operating and Maintenance Costs
- Easy Maintenance and Servicing
- 1-Year Limited Warranty
- Made in the U.S.A.
Brackish Water Treatment Ro Plant Size Required
BRACKISH WATER TREATMENT RO PLANT 3000 GPD
BRACKISH WATER TREATMENT RO PLANT 5000 GPD
BRACKISH WATER TREATMENT RO PLANT 6000 GPD
BRACKISH WATER TREATMENT RO PLANT 10000 GPD
BRACKISH WATER TREATMENT RO PLANT 15000 GPD
BRACKISH WATER TREATMENT RO PLANT 20000 GPD
BRACKISH WATER TREATMENT RO PLANT 25000 GPD
BRACKISH WATER TREATMENT RO PLANT 30000 GPD
BRACKISH WATER TREATMENT RO PLANT 40000 GPD
BRACKISH WATER TREATMENT RO PLANT 50000 GPD
BRACKISH WATER TREATMENT RO PLANT 60000 GPD
BRACKISH WATER TREATMENT RO PLANT 70000 GPD
BRACKISH WATER TREATMENT RO PLANT 80000 GPD
BRACKISH WATER TREATMENT RO PLANT 90000 GPD
BRACKISH WATER TREATMENT RO PLANT 100,000 GPD
BRACKISH WATER TREATMENT RO PLANT 150,000 GPD
BRACKISH WATER TREATMENT RO PLANT 200,000 GPD
BRACKISH WATER TREATMENT RO PLANT 250,000 GPD
BRACKISH WATER TREATMENT RO PLANT 300,000 GPD
BRACKISH WATER TREATMENT RO PLANT 350,000 GPD
BRACKISH WATER TREATMENT RO PLANT 400,000 GPD
BRACKISH WATER TREATMENT RO PLANT 450,000 GPD
BRACKISH WATER TREATMENT RO PLANT 500,000 GPD